How to switch the automatic switch-on time off:
➔
Turn the rotary control to “SETTINGS” and press it.
➔
Turn the rotary control to “TIMES” and press it.
➔
Turn the rotary control to “APPLIANCE AUTO-ON” and press it.
➔
Turn the rotary control to “DEACTIVATED” and press it.
The automatic switch-on time is now switched off.
➔
If necessary press the
exit button several times to leave the time menu
3.7. Setting the automatic cup heating (model 859)
Using this function the cup heating will be automatically started when the appliance is switched on.
If the option “CUP HEATING AUTO-ON” is set jointly with the automatic switch-on time, the cup
heating starts when the appliance is switched on. Otherwise the cup heating can be switched on or
off manually by button (fig.1/K).
➔
Turn the rotary control in the main menu to “SETTINGS” and press it.
➔
Turn the rotary control to “CUP HEATING” and press it.
➔
Turn the rotary control to “AUTO-ON” and press it.
The display shows the other settings.
➔
You can adjust the other time settings directly here or leave the menu using the
exit button.
Note: If AUTO-on is set, the cup heating starts 30 minutes before the appliance starts.
How to switch the automatic cup heat off:
➔
Turn the rotary control to “SETTINGS” and press it.
➔
Turn the rotary control to “CUP HEATING” and press it.
➔
Turn the rotary control to “MANUALLY ONLY” and press it.
The automatic switch-on is now turned off.
➔
Return to the main menu with the exit button.
3.8. Setting switch-off rinsing process
Ex-factory the automatic switch-on rinsing function is permanently installed. Every time the appli-
ance is switched on after an inactive state, it will heat the water up and ask for a rinse to ensure that
fresh water is always used. This request is shown in the display and needs to be started manually by
pressing the rotary control.
Ex-factory the switch-off rinsing is set on “ON”.
Optionally the automatic switch-off rinsing function can be deactivated after the appliance has been
switched off:
➔
Turn the rotary control to “SETTINGS” and press it.
➔
Turn the rotary control to “SWITCH-OFF RINSING” and press it.
➔
Turn the rotary control to “ON” or “OFF” and press it.
The display shows the other optional settings.
➔
You can adjust the other time settings directly here or leave the menu using the
exit button.
Note: Even if the switch-off rinse is set on “ON”, it will only be executed if at least one drink has been
prepared.
3.9. Menu display
You can select large or small icons for main menu.
➔
Turn the rotary to “SETTINGS“ and press.
➔
Turn the rotary to “MENU DISPLAY” and press.
➔
Turn the rotary left or right for smaller or larger icons to be displayed.
➔
Press rotary to finish.
74
GB
3. Setting/adjusting basic settings
04_Niv_859_BDA_sw_GB_03.indd 74
13.04.17 15:42
