HOSE”.
After a short while the display shows “CONNECT HOSE TO SPOUT AND DRIP TRAY”.
➔
Connect the hose to the spout (fig. 7) and the other end to the drip tray (fig. 10).
➔
Press the rotary control.
The display shows “CLEANING FROTHER, DO NOT REMOVE HOSE”.
Once the cleaning cycle is finished, the appliance starts heating up and is again ready for use.is
complete.
➔
Empty the drip tray and used coffee container (fig. 1/N and 1/O) and re-insert them cleaned.
The display shows the main menu.
5.4. System cleaning
Note: If the appliance needs cleaning, the display will show “PLEASE CLEAN SYSTEM”. You can continue
making coffee, but we recommend starting the cleaning program as soon as possible. Otherwise the func-
tion might be impaired and your warranty could be compromised.
Attention: Do not disrupt the cleaning process. Insert cleaning tab only if the appliance asks for it.
➔
Turn the rotary control to “MAINTENANCE” and press it.
➔
Turn the rotary control to “CLEAN SYSTEM” and press it.
The display shows “EMPTY TRAYS” and “FILL WATER” alternatingly.
➔
Remove drip tray and used coffee container (fig. 1/N and 1/O) and empty both.
➔
If necessary refill the water tank with fresh water. Reinsert the water tank first, followed by drip
tray and used coffee container.
The appliance rinses twice and the display shows “CLEANING SYSTEM”.
The display shows “CLEANING TAB IN GROUND COFFEE CHUTE”.
➔
Place a sufficiently large bowl (minimum contents 0.5 l) under the spout (fig. 1/E).
➔
Open the lid on the right hand side of the appliance (fig. 1/G).
➔
Open the lid of coffee powder chute (fig. 1/M).
➔
Place a cleaning tab in the chute and close both lids.
The display shows “START CLEANING”.
➔
Press the rotary control to confirm.
The appliance starts the cleaning process. The display shows “CLEANING SYSTEM”. The fully auto-
mated process takes approximately 10 minutes.
Note: Should a message appear during the cleaning process, follow the indicated steps. The appliance
will continue with the cleaning automatically afterwards.
Once the process is finished, the display shows “EMPTY TRAYS“
➔
Remove drip tray with used coffee container (fig. 1/N and 1/O), empty both and reinsert them.
➔
If necessary refill the water tank with fresh water. Reinsert the water tank first, followed by drip
tray and used coffee container.
The appliance rinses, reheats and is ready for use after that. The display shows the main menu.
5.5. Descaling
If the appliance needs descaling, the display shows “PLEASE DESCALE SYSTEM”.
You can also start the descaling programme any time manually.
Attention: Please make sure to follow each step exactly as outlined below! You can continue making
coffee, but we recommend starting the descaling program as soon as possible. Otherwise the function
might be impaired and your warranty could be compromised.
84
GB
5. Cleaning and maintenances
04_Niv_859_BDA_sw_GB_03.indd 84
13.04.17 15:42
