Select temperature
(if “TEMPERATURE”, see 3.3. “INDIVIDUAL” is set in the menu “SETTINGS”)
➔
Turn the rotary control to “TEMPERATURE” and press it.
➔
Turn the rotary control the temperature of your choice (STANDARD, HIGH, MAXIMUM) and press
it to confirm the setting.
➔
To exit a menu level turn the rotary control to “EXIT” in each level. Then press the rotary control.
Or press the
exit button.
➔
Repeat until you are back in the main menu.
Note: If no changes are made to the settings for some time, the appliance switches back to the main
menu automatically.
4.3. Adjusting standard settings for drinks with milk
(CAPPUCCINO, LATTE MACCHIATO, WARM MILK)
The standard ex-factory setting is:
• for cappuccino: strength standard, quantity 200 ml, aroma profile 2, the display shows “ooo 200
ml II”
• for latte macchiato: strength standard, quantity 300 ml, aroma profile 2, the display shows “ooo
300 ml II”
• for warm milk: quantity 150 ml, the display shows “150 ml”.
Using the frother you can draw milk directly from the carton or any other container and pour it
directly into a cup or glass.
➔
Connect the suction hose to the height-adjustable spout (fig.7).
➔
Connect the other end of the hose to the Milk Cooler (Accessories NICT 500), or immerse it
straight into the carton or another container.
Attention: Dried milk residue is difficult to remove. Please clean thoroughly as soon as it has cooled
off! Always follow the display instruction “CLEAN FROTHER”.
➔
Place a cup or a glass under the spout (fig. 5).
➔
Turn the rotary control to the drink of your choice (e.g. “LATTE MACCHIATO”) and press it.
The cup light switches on. The appliance is preparing a cup or glass of the selected drink in the
standard setting.
Brewing two cups:
➔
To brew two cups one directly after the other, press the rotary control twice in quick succession to
start the process.
The standard setting can be altered in two different ways:
4.3.1. Live programming
You can change and save the standard setting during the brewing process as follows.
➔
Turn the rotary control to “SETTINGS” and press it.
➔
Turn the rotary control to “DRINK RECIPES” and press it.
➔
Turn the rotary control to the drink of your choice (e.g. “LATTE MACCHIATO”) and press it.
➔
Turn the rotary control to “LIVE PROGRAMMING”.
➔
To change the standard setting press the rotary control.
Cappuccino and latte macchiato:
The display shows “SELECT STRENGTH”.
➔
Turn the rotary to select the strength of your choice (left for weaker, right for stronger).
➔
Press the rotary to confirm your setting.
The display shows “SELECT AROMA”.
78
GB
4. Preparing coffee varieties
04_Niv_859_BDA_sw_GB_03.indd 78
13.04.17 15:42
