niu N-GT, Service Manual

Page: 12 / 144

V1.0.0 12
Parts Removal and Installation Procedure
Procedures for removal and installation of scooter body panels are described in this section.
The ignition switch and main switch (if applicable) must be turned to OFF before disconnection or
connection of electric units, when the storage battery has been installed onto the scooter.
Note
•
Do not damage scooter body coverages in disassembling/assembling.
•
Do not damage hooks and claws on scooter body coverages in disassembling/assembling.
•
Align the embedded panels and covers on scooter coverages with their respective grooves.
•
Hooks and claws at various sections should be installed properly during assembly.
Section 1.
Windshield
1.1 Unscrew two screws on the Windshield
(earlier models may have 3 screws)
Section 2. Front Neck Cover
2.1 Remove two Front Central Cover
Rubber Plugs and unscrew two screws
inside
2.2 Remove Front Neck Cover by lifting it
at front