niu N-GT, Service Manual

Page: 105 / 144

V1.0.0 105
Prop Stand: If the prop stand is extended,the electronic motor is cut-off.
It cannot be restarted until the prop stand is moved into its retracted position.
How to check Side Stand Switc
（
Ref: 027)
Step 1: Disconnect the connector to Check power input;
Check DC voltage between Red wire and Black wire on harness side, Voltage reading
should be ~5V
Step 2: Turn the power ON
Step 3: Connect the connector to Check DC voltage between Yellow wire and Black wire on
component side
Step 4: When the side stand is retrieved(not used), voltage should be around ~3.5V
When the side stand is used(side stand is down), voltage should be 0V.