Nisca PR5300, User Manual

Page: 6 / 55

2
Note This note symbol means reader take note . Notes contain important information
and helpful suggestions about your printer.
General Site Requirements
When choosing a site for the PR5300, consider the following recommendations:
Select a site that is out of direct sunlight.
Placement should be on a sturdy platform and off the floor.
Platform should be free from vibration.
Environment should be free from high humidity and dust.
Environment should have a relatively stable temperature.
Provide enough space to allow adequate ventilation.
Place it in a location that allows easy access to all sides.
Important Safety Instructions
Before using your printer, read the following safety instructions to make sure you use the printer
safely and effectively:
Turn off and unplug the printer before cleaning.
Do not spill any liquids on the printer.
Always prevent debris from entering the printer.
Do not place any heavy objects on the printer.
Use only a power source indicated in the electrical requirements section.
Do not place the printer on an unstable surface or near a radiator or a heating vent.
Do not place the printer near sources of heat or electromagnetic interference.
Except as specifically indicated and explained in this User’s Guide, do not attempt to
service the printer yourself.
When moving the equipment, always be sure to turn off the power prior to moving.
Do not let the power cord become damaged or frayed.
Do not block the air vents or fan on the printer. Do not touch any part inside the printer
except as directed by this User’s Guide.
Do not use the printer for purposes other than its intended use.
Unplug the printer and refer servicing to qualified service personnel in the event that any
of the conditions exist:
•
The power cord or plug is damaged.
•
Any liquid or solid object falls into the printer.
•
The printer has been dropped or the case has been damaged.
•
The printer does not operate normally or exhibits a distinct change in
performance.