12
Note
Use only a shielded, Type C, IEEE 1284 parallel port cable, up to a maximum of
6.5 feet long.
1. Make sure the printer and computer are turned off.
2. Connect the micro centronics connector to the printer’s parallel port, and snap the
fastening clips into place.
3. Connect the other side of the cable to the parallel connector on the back of the computer.
4. Insert the power cord into the power receptacle on the rear of the printer. Plug the other
end into an available wall outlet.
USB Connection
To connect the printer to your computer, obtain the appropriate USB 2.0 cable.
1. Make sure the printer and computer are turned off.
Summary of Contents for PR5300
Page 2: ......
Page 45: ...41 PR5300 Block Diagram Flip Turn Feeder Print Unit Encoder...
