4
Connecting the Photo Scanner (NS-P1S/SU)
4.1
Using the SCSI Interface
Connect your PC or other devices to the scanner via the SCSI interface.
•
Connect the scanner to your PC or to another SCSI device.
•
Before connecting the scanner, ensure that the scanner, PC and any peripherals or other
SCSI devices are all switched off.
Set the SCSI ID.
If you are daisy-chaining multiple SCSI peripheral devices, care must be taken to avoid
duplicating SCSI IDs. Note that if SCSI IDs are duplicated, data on the devices with the duplicate
IDs may be lost.
1
•
The factory default SCSI ID for the scanner is “6”.
•
The SCSI ID is set using the DIP switches on the back of the scanner. Refer to ID number
chart below to set the desired ID.
ID
number
“0” “1” “2” “3”
ID
number
“4” “5” “6” “7”
Factory default setting
15
P1SeManu220-Eng
