To use the USB interface, provide a USB cable that meets the following requirements:
2
•
To connect the scanner to your PC or to a USB hub, a separate USB cable that matches the
scanner’s SCSI interface is needed. You must provide the appropriate cable for the devices
to be connected.
•
Ensure that the connectors on the USB cable match the USB ports on the respective
devices.
•
The scanner’s USB port is a Series B connector.
•
Use a USB 2.0 authorized USB cable.
Series A Connector
on the PC Side
Series B Connector
on the Scanner Side
2.4
Recommended PC Hardware and Software
To run the Photo Scanner (NS-P1S/SU), the following system hardware and software is
recommended:
SCSI
USB
NOTE
OS
Windows 98/98SE/Me/
NT4.0/2000/XP
Windows 98SE/Me/
2000/XP
CPU
Pentium III 866MHz or higher
Memory
128MB or higher
Hard Disk Size
1.5Gbyte
Recommended SCSI Board
Adaptec 2940AU
Note: The latest Microsoft compatible USB 2.0 driver is necessary.
13
P1SeManu220-Eng
