74
9.3 Installing Seika Braille notetaker Patch for SuperNova 18 or older version
NOTE: If your Supernova version is 19 or later, please ignore section 9.3 and 9.4.
1. Please Install SuperNova screen reader firstly.
2. Open the Supernova folder: C:\Program Files\Dolphin\Sam\seika Or C:\Program Files
(x86)\Dolphin\Sam\seika
3. Unzip the Seika Braille notetaker Patch for SuperNova and copy all the files (not the folder) into
above Seika folder.
4. Select "Yes" when prompt whether replace the files.
9.4 Configuring SuperNova 18 or older version
NOTE: If your Supernova version is 19 or later, please ignore section 9.3 and 9.4.
1. Connect the Seika Braille notetaker with PC use by USB cable. Switch on the Seika Braille
notetaker and run USB connect in the main menu.
2. Switch on the Seika Braille notetaker and run the "usb connect" in the main menu.
3. Open SuperNova and select "General->Advanced Options", there is a "General Advanced Options"
dialog box appear. Press "SAM Setup" button there is a "SAM Configuration" dialog box appears.
4. Select and highlight the "Seika Braille" item and select "Configure" button. "Seika Braille
Configuration" dialog box will appear.
5. Select "Auto detect" and press "OK" button. Make sure the "Seika Braille" item displays 1 unit.
6. Press "Close" button on the "SAM Configuration" dialog box. Press "OK" on the "General
