56
connection.
If you already set up the connection successfully, there is a fast connection way. After you power on
the Seika Braille notetaker, please DO NOT touch any keys, the Seika Braille notetaker will open
Bluetooth and wait connection. So you can launch the voiceover and set up the connection.
If the iPhone or iPad is sleep or out of range, or you restart the Seika Braille notetaker, the connection
maybe broken. You can double click the TSM xxxx in Aside -Braille-Choose a braille display and set
up the connection again.
If you would like to switch two iOS devices connection with the Seika Braille notetaker, you can
make one iOS device sleep and the Seika Braille notetaker will wait connection. Then you can start
the other iOS device and double click the TSM xxxx in Aside-Braille-Choose a braille display, the
connection will be set up with this iOS device.
By default, Aside displays uncontracted, eight-dot braille. In this mode, Aside automatically translates
each character and digital you type on your braille display into braille output, as you type it. You can
turn off eight-dot braille to use uncontracted, six-dot braille instead. In this mode, Aside automatically
translates each word you type on your braille display into braille output, after it determines you've
completed a word or you press the Space bar on your braille display.
NOTE: Once you set up connection between iOS and your Seika Braille notetaker, the iOS will
record this Seika Braille notetaker device. In the future maybe you meet connection
problem between iOS and your Seika Braille notetaker, don't worry about it. You should find
