48
4.2 Working in JAWS
4.2.1 Configuring JAWS
Start JAWS and select "Braille..." in the "Options" menu.
Assuming that the default Braille display is set to "No display", tab to the "Add Braille
Display" button and press Enter.
In the "Select components" dialog box, there is a list of Braille displays. Select the "Seika" by
pressing the Space bar.
Tab to the "Next" button and press Enter.
If you connected the Seika Braille notetaker to your computer by USB cable, select "USB" as the
output port.
If you connected the Seika Braille notetaker to a PC using Bluetooth, in the "Set device options"
dialog box, select the output port that corresponds to the COM port number that you made note of in
chapter 3.2. Tab to the "Next" button and press enter.
When prompted to set the primary device, select "Seika" in the "Primary device" list.
Tab to the "Finish" button and press Enter.
In the "Braille Basic Settings" dialog box, tab to the "OK" button and press it.
Switch on the Seika Braille notetaker and run USB connect (please connect Seika Braille notetaker
with computer through USB cable) or Bluetooth connect in the main menu.
Restart JAWS and the Seika Braille notetaker can be used as a Braille display.
