Instruction Manual: EMP-3
NIC-TD-0000067-01
Nippon Instruments Corporation
66
(3)
Press “Lamp”. The lamp is turned off. The “Lamp” button is used for on/off switching.
Green shows “on” and black shows “off”.
(4)
Make an adjustment for “ZERO”.
As in the case of “SPAN”, press the up- and down-arrow buttons or each numerical
button, and make an adjustment to minimize each voltage.
(5)
Press “OK”. The voltages are fixed.
If “Cancel” is pressed instead of “OK”, the adjusted voltages will not be set.
(6)
Press “Exit” to return to the previous screen.
At the time of a shipment, the voltages are set to 2.5 V at room temperature.
Although the voltages may change a little because of a change of the environmental
temperature, dirt in the instrument and so on, it is unnecessary to change the voltages in
ordinary operation condition.
To adjust the voltages, refer to the following cases:
