Instruction Manual: EMP-3
NIC-TD-0000067-01
Nippon Instruments Corporation
9
3. INSTALLATION
Although the EMP-3 has drip-proof and dustproof features
(except for sample gas) equivalent to IP63, to obtain precise
and accurate measurement results, it is advisable to avoid
installation in an environment with high temperature and
humidity or with much dust and exposure to rainfall or liquid.
Observe the installation requirements and installation
procedure. Otherwise, a failure may result.
Do not install the instrument within a 10 m radius from another
instrument that generates noise, such as a high output electric
power instrument, high frequency instrument, SCR controlled
machine, emission spectrophotometer or electric welder. Also
be fully careful of static electricity.
When measurements are made with the instrument kept
motionless, install it on a horizontal place with sufficient
strength.
Otherwise, a failure or a minor injury caused by an overturn or
a fall may result.
To install the instrument on a desk or the like, stand the tilting feet and install the instrument
as shown below:
Caution
