Instruction Manual: EMP-3
NIC-TD-0000067-01
Nippon Instruments Corporation
58
ERRORS AND WARNINGS
Even when a warning message has been displayed, a measurement operation is possible.
However, when an error message has been displayed, it is impossible to start a measurement.
Remove the cause of the error, restart the instrument and then start a measurement.
If the error status is not canceled even after measures are taken, an electric malfunction may
be the cause.
Consult with the agent or us.
Warning Messages
Message
Contents and Measures
STANDBY XX:XX
Displayed for 10 minutes after the instrument is turned on.
Lamp Life Exceeded
Displayed when the lamp lighting-up time has exceeded 2000 hours.
The replacement of the lamp by our agent or service department is
necessary.
Pump Life Exceeded
Displayed when the pump operation time has exceeded 2000 hours.
The replacement of the pump by our agent or service department is
necessary.
Zero Filter Life Exceeded
Displayed when the quantity of mercury adsorbed by the ZERO filter
has exceeded the permissible value.
It is necessary to substitute a new ZERO filter.
(Refer to “6.5.1 REPLACEMENT OF ZERO FILTER”.)
Low Battery Level
Displayed when the battery level has lowered.
Substitute a charged battery.
(Refer to “4.4.1 CHARGING AND CONNECTION OF BATTERY”.)
