Instruction Manual: EMP-3
NIC-TD-0000067-01
Nippon Instruments Corporation
21
Do not let liquid such as water splash the instrument. Never
operate the instrument with a wet hand. Otherwise, an electric
shock, a short circuit of an electronic circuit or a failure caused
by corrosion may result.
Although the EMP-3 has drip-proof and dustproof features
(except for sample gas) equivalent to IP63, to obtain precise
and accurate measurement results, it is advisable to avoid
installation in an environment with high temperature and
humidity or with much dust and exposure to rainfall or liquid.
Observe the range of the specification. If the instrument is used
out of the specification range, a failure may occur.
Do not give a shock to the instrument by dropping, throwing or
the like. The limit of fall height is 3cm.
Do not apply a strong external force to the screen by pushing
strongly, striking or the like.
4.5.3.1 START OF MEASUREMENT
(1)
Direct the probe to measurement sample.
(2)
Press “START”. A measurement starts.
*
Before starting a measurement, make sure that the remaining battery life is sufficient
and that the measurement mode is correct.
Warning
Caution
