D-F10137 NP-2651/3651 Product Spec. Rev.0.01(Provisional)
38
4.7
Alarm Lamp Display and Switch Function
The following operations are equipped with the printer.
1) ALARM (red) [Alarm lamp]:
lights on (or blinks) when printer is on error status.
blinks/ lights ON/ lights OFF when rewriting Flash ROM.
*The pattern of the ALARM indication is in the following chart.
Display pattern
Printer status
Priority
(8:High~ 1:Low)
1
0
Normal
1
Print(receive) enable
1
0.2secc
0
0.2sec
Paper near end
2
1
0
Paper-out
3
Thermal head cover open
4
1
2.2sec
0
2.2sec
Head temperature abnormal
(approx. 70ºC or more)
5
Or inappropriate head
connection
1
0.2sec
0
0.2sec 1.0sec
Auto cutter error
6
Paper detection error
7
1
0.1secc
0
0.1sec
F/W write mode
8
2) FEED Switch [Paper feed switch]:
Switch to feed paper in the forward direction
Also, used in self-printing and memory switch setting.
[Note]
*Changeable to Valid or Invalid by setting command[Valid or Invalid FEED
switch]
《
ESC c 5
》
.
*When FEED switch is operated, paper full-cutting is operated after paper
feeding.
3) RESET Switch
Reset switch is equipped at the right side of FEED switch
(Please push it lightly with ballpoint pen edge or etc. and release.)
It requires setting it again when executing RESET because printer will return to same status
as turning the power on. Please make sure that data will be deleted when data remains in
the buffer memory.
Side view
FEED SW
ALARM
RESET
