D-F10137 NP-2651/3651 Product Spec. Rev.0.01(Provisional)
8
3) Specifications for label paper
Name
HW76B
Total thickness
154μm
or less (Including adhesive)
Label thickness
94μm
Base thickness
60μm
Manufacturer
Nippon Paper Industries Co., Ltd.
Base color
White
Print density setting 5
℃
~60
℃
:100
％
External diameter
of label paper
φ150mm
or less
Use condition for
base paper
Temperature 5
℃
~35
℃
Humidity 30
％
~85
％
Regulation for
paper core
Paper core I.D.:
φ
25.4mm
Paper core O.D.:
φ
33.4mm
Base width
57.5±0.5mm/59.5±0.5mm/79.5±0.5mm
Label width
54±0.5mm/56±0.5mm/76±0.5mm
Label length
20mm~320mm
Label gap length
2~32mm
*6mm or more when operating backfeed(Recommended)
Winding direction
Outer side of thermal paper
[Note]
・
Label paper with mark is unusable.
・
Label paper whose gap length is 2mm or less is unusable.
・
Label paper whose length is 20mm or less is unusable.
・
Please confirm firmly pre-printed label paper for use since it does not work correctly.
・
Please evaluate and test print quality under the environment to use and set print density since
print quality may decline depending on temperature and humidity.
Also, it fluctuates largely depending on paper specifications to use.
Print density is able to be set by command [Print density setting] <GS~n>.
・
Condensation on this product or contamination with paper due to water vapor may occur if
printing with high print ratio under the environment with low temperature or high humidity.
Please beware not to make water drop onto thermal head. It may cause galvanic corrosion.
・
Please evaluate and test firmly in customer’s side when use except the above things.
(In order to prevent galvanic corrosion, the paper include low NA+ ion, K+ ion, and CI- ion is
applicable)
・
Please do not use the recommended paper under the environment with minus temperature
since label may be peeled. Please confirm the specifications of paper when use of other
paper.
・
Please confirm at customer’s side when use of the paper exceeding its thickness 1
54μm
.
4) Paper holder
Name
Paper core
Paper Near
End
Standard
UPH-Arm_W_Unit
(Arm)
I.D.
φ
25.4mm
O.D.
φ
33.4mm
φ39.0±2.5mm
NP-3651/2651
[Note]
・
Please consult us if paper holder for
φ102mm
. (It is treated as OEM)
・
Please regard the O.D. value of paper near end detection as the indication value since it
fluctuates depending on paper type or paper thickness.
