D-F10137 NP-2651/3651 Product Spec. Rev.0.01(Provisional)
36
[Note]
・
Please do not conduct detection of gap to reverse direction in case gap length is not able to
be broadened than 5mm(1). Label may be peeled, paper jam occurs, and glue adhere to
head or other part which cause failures.
*3: When back feed is conducted by command for redetection of gap, enough distance which
gap reach to transmission sensor is required before the terminal of label 1 interfere the tip
of cover. 6mm or more is recommended.
When adjusting with gap length
Terminal
Paper Feed
Direction
5mm (1)
Head
Cover
Transmission
sensor
Tip
6.5mm
Label 2
Gap
Broaden than 5mm(1)
*3
Label 1
