22
3.2 Installation Method
3.2.1 Combination with Powerhead
Do not install any unapproved powerhead to the attachment.
* The attachment could come off during use, resulting in a serious accident.
The attachment can be installed only to our approved equipment (shown below).
For detail, refer to the table below.
Manufacturer
Our approved powerhead
Thai Honda Manufacturing Co.,Ltd.
UMC425E
Thai Honda Manufacturing Co.,Ltd.
UMC435E
Thai Honda Manufacturing Co.,Ltd.
UMC425U
Thai Honda Manufacturing Co.,Ltd.
UMC435U
3.1.2 Connecting
Loosen the knob bolt [1] of powerhead
connections.
Align the boss (protrusion) [2] at the
end of the pipe with the slit of the joint
case [3], and insert it to the label [4]
position.
[1]
[4]
[3]
1
[2]
[3]
2