Ningbo Benye 35 Series, Manual, Page: 12 / 61

·
11
·
Chapter II. Safety Regulations and Important
Notices in Operation of the Tractor
Ⅰ
. Safety Regulations.
A. The tractor can be operated only by the especially trained operator.
B. Before starting-up, it is necessary to see whether there is any obstacle on road, or any person
between the tractor and farm implement or trailer.
C.
In driving, no one is allowed to climb up or get down the tractor. It is forbidden to make any
inspection or repair under the tractor while the engine is running, or to touch the rotating parts or
the exhaust pipe.
D.
Before getting off the tractor, the operator is asked to put all gearshift levers in neutral
positions.
E.
Lightening instruments should be ensured completely reliable while the tractor works at
night.
F.
On steep road, only low speed gears can be used. Rolling down a steep slope, the tractor is
never driven with the gearshift lever in neutral position.
G.
In transportation, the left and right brake pedals should be joined together.
H. When the tractor running at high speed, neither a sharp turn nor a single side brake for a
sharp turn is permitted.
I .
When not being used, the differential lock must be put in the state of disengagement, and
must be strictly forbidden in the state of "engagement" while the tractor is driven.
.
II. Important Notices
A. A new or overhauled tractor can be operated to take normal load after its running-in
according to the "Running -in of the New Tractor".
B. Nuts, bolts and all the other easily loosening accessories and connecting parts, such as the
nuts of the guide and drive wheels, the connecting bolts of the draw bar at the rear end of the
tractor and of the transmission, should be often checked. If any loose, it needs to be tightened.
C. Check oil line, electrical circuit and cooling water before starting. It is the precondition to
keep engine work normally by using clean diesel. In any case , no unfiltered fuel is allowed to
be poured into the fuel tank. The readings of the instruments should be carefully noticed after
starting.
D. The shut-off valve on the right side of lift needs to be closed when the tractor with
implement is driven.
E. In stationary operation with pulley, the auxiliary gearshift levers are put in neutral position,
of which the main gearshift lever is put in Gear-I or Gear -II position in order to ensure the
front bearing of the Primary Shaft in gearbox normally lubricated.
F. The tractor with high lug tires is used only for farm operations or driving in field, and not
allowed to be driven on road at high speed.
G. The respective four screw holes of M12 and M18 on the both sides of the bridge case are
used to fix driver's cab, farm implements or accessories. If being fixed with front loader or