.4.
.5.
DANGER:
“Danger” indicates a hazardous situation which if not avoided, will result in death
or serious injury.
WARNING:
“Warning” indicates a hazardous situation which if not avoided, could result in
death or serious injury.
CAUTION:
“Caution” indicates a hazardous situation which if not avoided, could result in
minor or moderate injury.
NOTE:
“Note” provides tips that are valuable for the optimal operation of your
product.
2. Safety & Warning
2. Safety & Warning
2.1 Safety
The following types of safety instructions and general information appear in this document as
described below:
2.2 General Safety Instructions
2.3 Notice for Use
The inverter has been constructed according to the applicable safety and technical guidelines.
Use the inverter in installations that meet the following specifications ONLY:
1. Permanent installation is required.
2. The electrical installation must meet all the applicable regulations and standards.
3. The inverter must be installed according to the instructions stated in this manual.
4. The inverter must be installed according to the correct technical specifications.
WARNING:
Only devices in compliance with SELV (EN 69050) may be connected to the
RS485 and USB interfaces.
WARNING:
Please don’t connect positive (+) or negative (-) cable to ground, it could
cause serious damage to the inverter.
WARNING:
Electrical installations must be done in accordance with the local and national
electrical safety standards.
WARNING:
Do not touch any inner live parts until 7 minutes after disconnection
7min
from the utility grid and the DC input.
CAUTION:
Risk of electric shock, do not remove cover. There is no user serviceable parts
inside, refer servicing to qualified and accredited service technicians.
CAUTION:
Risk of electric shock from energy stored in capacitors of the Inverter, do not remove
cover for 7 minutes after disconnecting all power sources (service technician only).
Warranty may be voided if the cover is removed without authorization .
CAUTION:
The surface temperature of the inverter can reach up to 75
℃
(167 F).
To avoid risk of burns, do n
ot touch the surface of the inverter while it’s operating.
Inverter must be installed out of the reach of children.
WARNING:
Operations below must be accomplished by licensed technician or Solis
authorized person.
WARNING:
Operator must put on the technic
ians’ gloves during the whole process in case of
any electrical hazards.
