ENGLISH
USER MANUAL
18
1464020000(1)2009-04 A
SR 1101 P
MAIN BROOM REPLACEMENT
NOTE
Brooms of various hardness are available. This
procedure is applicable to all types of brooms.
CAUTION!
It is advisable to wear protective gloves when
replacing the main broom because there can be
sharp debris between the bristles.
Drive the machine on a level ground and engage the
1.
parking brake.
Turn the ignition key (82) to “0”.
2.
Unscrew the knobs (23) and remove the right door (22).
3.
Loosen the knob (A, Fig. 3).
4.
Unscrew the knobs (B, Fig. 3) and remove the broom
5.
compartment cover (C).
Remove the broom (A, Fig. 4).
6.
Check that the drive hub (A, Fig. 5) is free from dirt or
7.
foreign materials (ropes, rags, etc.) accidentally rolled up.
The new main broom must be installed with the bristles
8.
rows (B) bent as shown in the
fi
gure.
Install the new main broom (C, Fig. 5) and ensure that the
9.
mesh (D) correctly
fi
ts into the relevant drive hub (A).
Install the broom compartment cover (C, Fig. 3) and
10.
tighten the knobs (B) and (A).
Install the right door (22), then tighten the knobs (23).
11.
Check and adjust the main broom height as shown in the
12.
previous paragraph.
A
C
B
B
S311391
Figure 3
S311392
Figure 4
S311393
Figure 5
