12/2017
A - 5
56091197 - Nil
fi
sk Liberty SC50
ENGLISH - A
INSTRUCTIONS FOR USE
9/2018
CAUTIONS AND WARNINGS - CONTINUED
CAUTION!
•
This machine is not approved for use on public paths or roads.
•
This machine is not suitable for picking up hazardous dust.
•
Do not use scari
fi
er discs and grinding stones. Use only pads or brushes intended for
fl
oor cleaning. Nil
fi
sk will not
be held responsible for any damage to
fl
oor surfaces caused by using the wrong or improper pads or brushes.
•
When operating this machine, ensure that third parties, particularly children, are not endangered.
•
Before performing any service function, carefully read all instructions pertaining to that service task.
•
After use do not leave the machine unattended where it can be accessed by others without
fi
rst powering the machine
off at the power switch.
•
Power the machine OFF at the power switch and remove the magnetic SmartKey, before changing the brushes, and
before opening any access panels.
•
Take precautions to prevent hair, jewelry, or loose clothing from becoming caught in moving parts.
•
Use caution when moving this machine in below freezing temperature conditions. Any water in the solution, recovery
or detergent tanks or in the hose lines could freeze, causing damage to valves, pumps and
fi
ttings. Flush with low-
temperature windshield washer
fl
uid.
•
The batteries must be removed from the machine before the machine is scrapped. The disposal of the batteries
should be safely done in accordance with your local environmental regulations.
•
Do not use on surfaces having a gradient exceeding that marked on the machine.
•
All doors and covers are to be positioned as indicated in the instruction manual before using the machine.
•
This machine should only be used and stored indoors.
•
The machine’s magnetic SmartKey has a built-in magnet. Do not place objects having magnetic bands (such as
credit cards, electronic keys, phone cards) near the key. The built-in magnet can damage or erase the data stored on
the magnetic bands.
•
Only use locations designated as “Tie Down Locations” to secure the machine during transport. Using any other
location of the machine to tie down the machine may cause damage or injury.
