A - 14
Nil
fi
sk Liberty SC50 - 56091197
12/2017
INSTRUCTIONS FOR USE
A - ENGLISH
9/2018
INFORMATION MENU DISPLAY – CONTINUED
Menu visible only with yellow (Supervisor) SmartKey.
Menu Level
Notes
1
2
3
Options
Supervisor selectable options
Solution
SmartFlow* (proportional to speed)
Fixed
Adjust solution
fl
ow to speed, or
fi
xed
fl
ow
Solution In Rev
No*
Yes
Leave solution on in reverse?
Warning Beep
Backup Beep*
Beep On
Beep Off
Beep when backing up, beep always on when
moving, beep off
Autonomy Beep
Beep Off*
Beep Low
Beep Medium
Beep High
Beep when scrubbing autonomously – off, low,
medium, high volume
Other Sounds
Normal
Quiet
Off
Volume of sounds (apart from horn, starting
autonomy beep, and backup beep)
Manual Light
On to Scan*
Always On
Always Off
“On to Scan” means the LED strip will be white
with blue corners when the camera is attempting
to read a Location Tag or a QR Code.
Obstacle Color
Red
Orange
Color of “Obstacle” chasing lights displayed on
LED status bar when an obstacle is encountered
Detergent Low
(300,256,200,150,128,100,64,50,32,26):1
– ratio cannot be > Detergent High
(0.3, 0.4, 0.5, 0.7, 0.8, 1.0, 1.5, 2.0, 3.0, 3.8)%
– percentage cannot be > Detergent High
Set detergent ratio for detergent low level
Detergent High
(300,256,200,150,128,100,64,50,32,26):1
– ratio cannot be < Detergent Low
(0.3, 0.4, 0.5, 0.7, 0.8, 1.0, 1.5, 2.0, 3.0, 3.8)%
– percentage cannot be < Detergent Low
Set detergent ratio for detergent high level
Detergent shown as
xxx:1
x.x%
Ratio or percentage
Neutral Delay (s)
min = 0.5*
max = 5.0
step = 0.5
Time to keep brushes on when in neutral
(seconds)
Vac Off Delay (s)
min = 15*
max = 25
step = 1
Time to keep vacuum on after turning off scrub
system (seconds)
Vac Startup
Full
Quiet
Last Used*
Vacuum level at start
Burst Of Power (s)
min = 60*
max = 300
step = 60
Burst-of-power (BOP) time span (seconds)
Fwd Speed Max (%)
min = 50%
max = 100%*
step = 10
Maximum forward speed as percentage of
maximum available speed in manual mode
Inactivity Time (min)
min = 5
max = 60
step = 5
default = 15
Inactivity time before putting machine in sleep
mode (minutes)
*Default setting
