34
34
34
34
34 - FORM NO. 56043089 / AquaRide
™
/ BRX 700
SOLUTION SYSTEM
SOLUTION SYSTEM
SOLUTION SYSTEM
SOLUTION SYSTEM
SOLUTION SYSTEM
E1
FRONT
B
A
F
D
E
C
L1
L2
FUNCTIONAL OVERVIEW
FUNCTIONAL OVERVIEW
FUNCTIONAL OVERVIEW
FUNCTIONAL OVERVIEW
FUNCTIONAL OVERVIEW
See Figure 1. Two molded plastic (polyethylene) tanks rear recovery and the main body structure store the machine’s extraction
solution. Total machine solution capacity is 45gallons (170 L). Plumbed into the solution shut off Valve (C)
(C)
(C)
(C)
(C) outlet is a serviceable spin
off Filter Housing Assembly (D)
(D)
(D)
(D)
(D) that keeps debris from entering the Solution Pump (E)
(E)
(E)
(E)
(E) and solenoid valves (L1 & L2). Also fitted
between the storage tanks is a short flexible Drain Hose (F)
(F)
(F)
(F)
(F) to drain both tanks for system maintenance.
The electrical circuit that turns on (energizes) the solenoid coils is activated through the combined operator panel buttons and main
controller assembly E1. Note: See the Know Your Machine section in this manual for a detailed explanation of the complete solution
operation modes. The two electrical solenoid valves L1 maintenance and L2 restoration control (start and stop) the two specific
defined solution nozzle outputs. The pump’s flow volume is directed through one or the other operator selected (turned on) solenoid
valve by hoses to the two separate brush nozzles A & B. Nozzle (A)
(A)
(A)
(A)
(A) directs the solution spray pattern onto the scrub brush when in
the maintenance extraction mode (minimum flow). Nozzle (B)
(B)
(B)
(B)
(B) directs the solution in front of the scrub brush when in the restoration
mode (maximum flow).
FIGURE 1
FIGURE 1
FIGURE 1
FIGURE 1
FIGURE 1