manualshive.com logo in svg

Nikon Scanners, Software Reference Manual

Introducing Nikon Scanners, a high-quality scanning solution for capturing your precious memories. Ensure optimal performance and explore the full potential of your scanner with the comprehensive Software Reference Manual. Download this manual for free from manualshive.com and unleash the true power of your Nikon Scanner.

Share
Download
background image

Producing a Scan

This chapter will take you through the ten basic steps in performing a scan using

either the Nikon Control or third-party application with the Nikon Scanner plug-in
software.  It will introduce you to scanning and the scanner controls in more detail than
in the “Getting Started” chapters.  This chapter assumes that the Nikon Control stand-
alone application and/or Nikon Scanner plug-in have been properly installed, and the
Main Scan dialog is open.

The ten steps to a quick scan are as follows:

Step 1.

Insert the slide into the scanner

Step 2.

Launch the application program

Step 3.

Select the film type and orientation

Step 4.

Perform a preview scan

Step 5.

Select the size (dimensions) of the scan

Step 6.

Select the final resolution of the scan

Step 7.

Select the area to scan

Step 8.

Perform a final scan

Step 9.

Name the file

Step 10.

Eject/Remove the slide

These ten steps are described here in greater detail.  

Step 1.  Insert the slide into the scanner

The first step required is, of course, to insert the slide into the scanner.  Selecting

and orienting the scanned image is described in detail in Chapter Twelve of this manual.

Step 2.  Launch the application program

Macintosh: Launch the Nikon Control software by double-clicking on its icon.

The Nikon Scanner plug-in will then be loaded and the Main Scan dialog displayed.

If you are using the Nikon Scanner plug-in with a third-party application that

supports Photoshop plug-ins, select the 

N

IKON

S

CANNER

item from the 

A

CQUIRE

sub-

menu in the 

F

ILE

pull-down menu, as illustrated in Figure 4.4 in Chapter Four.

Software Reference for Scanners

Page 41

Chapter 6

Producing a Scan

Summary of Contents for Scanners




















































































































































































































Reviews:

No comments

Related manuals for Scanners

Keithley 705 Instruction Manual preview
705
Brand: Keithley Pages: 80
GeoSlam ZEB-REVO Manual preview
ZEB-REVO
Brand: GeoSlam Pages: 13
4DDynamics IIID Scanner Quick Start Manual preview
IIID Scanner
Brand: 4DDynamics Pages: 2
Ambir FS531 Features preview
FS531
Brand: Ambir Pages: 1
Mustek Docking Scanner User Manual preview
Docking Scanner
Brand: Mustek Pages: 18
Colortrac L24e User Manual preview
L24e
Brand: Colortrac Pages: 90
Avision BS-1306S User Manual preview
BS-1306S
Brand: Avision Pages: 101
Autel MaxiLink ML619 Manual preview
MaxiLink ML619
Brand: Autel Pages: 57
earzone EZ-SC500 Operation Manual preview
EZ-SC500
Brand: earzone Pages: 17
Foxwell NT650 Elite Manual preview
NT650 Elite
Brand: Foxwell Pages: 37
Hasselblad Flextight X1 User Manual preview
Flextight X1
Brand: Hasselblad Pages: 183
Racing Electronics Uniden BC80 XLT Operation Manual preview
Uniden BC80 XLT
Brand: Racing Electronics Pages: 32
Rollei DF-S 190 SE User Manual preview
DF-S 190 SE
Brand: Rollei Pages: 41
Zebex Z-3191BT Quick Connection Manual preview
Z-3191BT
Brand: Zebex Pages: 2
Xerox 701P44148 Operator'S Manual preview
701P44148
Brand: Xerox Pages: 188
Panorama plus Operator'S Manual preview
plus
Brand: Panorama Pages: 51
Xerox Xerox Mobile Scanner User Manual preview
Xerox Mobile Scanner
Brand: Xerox Pages: 90
Canmax CM-2D700A User Manual preview
CM-2D700A
Brand: Canmax Pages: 252

Brands by name

Popular brands

Load more brands