Nikon F 100 Instruction Manual Download

Page: 85 / 112

Flash

Set the Speedlight’s flash sync mode selector and
check the display in the LCD panel.

• With the SB-26 or SB-25, the flash sync mode setting on the Speedlight

overrides the setting on the camera body.

• With the SB-800, SB-600, SB-80DX, SB-50DX, SB-28/28DX or SB-27, set

the flash sync mode on the camera body since the Speedlight has no flash
sync mode selector.

• Confirm that the indicators

(with the SB-800) or

and

(with

Speedligt other than SB-800) for Automatic Balanced Fill-Flash with TTL
Multi Sensor appear in the LCD panel. If these indications do not appear in
the LCD panel, press the MODE button (M button with SB-27/SB-26/SB-25)
until the indicators appear.

Compose picture, focus and confirm the indication in
the viewfinder.

• Lightly press the shutter release button and confirm the ready-light

ﬁ

appears in the viewfinder.

Confirm the flash shooting distance range and shoot.

• If the ready-light blinks approx. 3 sec. after full flash output, underexposure

may have occurred. Check the focus distance, aperture or flash shooting
distance range and shoot again.

• When using a Speedlight, make sure to read its instruction manual as well.

F100_En_16 7/8/05 8:06 PM Page 85

Summary of Contents for F 100

















































































































Search results

Summary of Contents for F 100

Reviews:

Related manuals for F 100

Brands by name

Popular brands

Nikon F 100, Instruction Manual

Search results

Summary of Contents for F 100

Reviews:

Related manuals for F 100

Brands by name

Popular brands