Nikon F 100 Instruction Manual Download

Page: 65 / 112

Changing Focusing Screens

Composition

•

In addition to the B-type BriteView screen supplied with the F100
camera, an E-type clear Matte/Fresnel screen with grid is available as
an option. This screen is suitable for copying and architectural
photography.

105

Remove the lens from the camera body and pull the
focusing screen release latch outward using the
supplied tweezers.

• The holder will spring open when the focusing screen release latch is pulled

outward using the tweezers.

Remove the screen by grasping the small tab with the
tweezers, and set the replacement screen in place.

• Make sure the screen is in its proper place.

Using the tweezers, push the front edge of the holder
upward until it clicks into place.

• Be sure not to touch the reflex mirror or the surfaces of the focusing

screens.

• Always use F100 focusing screens (focusing screens for other cameras

cannot be used).

F100_En_16 7/8/05 8:06 PM Page 65

Summary of Contents for F 100

















































































































Search results

Summary of Contents for F 100

Reviews:

Related manuals for F 100

Brands by name

Popular brands

Nikon F 100, Instruction Manual

Search results

Summary of Contents for F 100

Reviews:

Related manuals for F 100

Brands by name

Popular brands