46
Shooting in Each Exposure Mode
•
¡
: Programmed Auto
The camera automatically controls
exposure according to the exposure
combination in the program chart for
exposure that is correct for any shooting
situation. For more complex shooting, use
Flexible Program, exposure compensation
(page 54) or exposure bracketing (page
57).
• Programmed Auto can only be selected
when using a CPU lens.
1
2
Compose picture, focus and shoot.
• When the subject is too dark or bright, one of the following warning
indications will appear in the viewfinder or LCD panel.
•
H1
: Use ND filter.
•
Lo
: Use Speedlight.
·
2
:
Shutter speed/aperture value displayed in the LCD panel and
viewfinder can be set to change in steps of 1/2 or one (page 71).
Rotate the Main-Command Dial while pressing the
exposure mode
Δ
button to select
¡
.
• When CPU Nikkor lens other than G-type is not set to its minimum aperture
setting,
ƒEE
blinks in the LCD panel and viewfinder and the shutter locks.
• When a non-CPU lens is attached, exposure mode automatically switches
to Aperture-Priority Auto.
¡
blinks in the LCD panel and
A
appears in the
viewfinder. Set/confirm aperture with the lens aperture ring since
ƒ--
appears instead of the aperture value in the LCD panel and viewfinder.
F100_En_16 7/8/05 8:06 PM Page 46
Summary of Contents for F 100
Page 1: ...En INSTRUCTION MANUAL En ...
Page 14: ...14 ...