20
Load Film
3
3.
1
3.
2
Turn the power switch on, set the
camera’s film speed setting to
DX (page 34) and load DX-coded
film. Film speed will be set
automatically (ISO 25-5000).
Close camera back and press
the shutter release button to
advance the film to the first
frame.
Turn the power switch on, confirm that the film
speed setting is set to
s
, then open the camera
back by sliding the camera back lock release lever
while pressing the camera back lock release.
• See page 34 if the film speed setting is not set to
s
.
• Do not insert the film leader beyond the red index mark.
Insert film from the top side and pull film leader out
to red index mark.
DX-coded film
ISO
(film speed)
DX mark
3.
3
Hold the film cartridge and ensure film is properly
positioned with no slack, then gently close the
camera back until the camera back snaps closed.
F100_En_16 7/8/05 8:06 PM Page 20
Summary of Contents for F 100
Page 1: ...En INSTRUCTION MANUAL En ...
Page 14: ...14 ...
