57
Auto Exposure/Flash Exposure Bracketing
Exposure
•
Auto Exposure/Flash Exposure Bracketing allow you to shoot in
selected compensated EV value (maximum of ±2 EV) shifting from the
automatically set proper exposure (selected exposure in Manual
exposure mode) for a selected number of shots (maximum of three)
each time the shutter is released. Auto Exposure/Flash Exposure
Bracketing can be performed in any exposure mode.
1
Rotate the Main-Command Dial while pressing the
Auto Exposure/Flash Exposure Bracketing
W
button
so
z
appears in the LCD panel.
• Shutter speed and aperture in Programmed Auto, aperture in Shutter-Priority
Auto and shutter speed in Aperture-Priority Auto and Manual exposure mode
differ.
• In any of the exposure modes, Flash Exposure Bracketing (in which the TTL
Auto Flash level of the lighted main subject is shifted) and Auto Exposure
Bracketing (in which the exposure of a background lighted by ambient light is
shifted) are simultaneously performed when a Speedlight is used.
·
11
:
Bracketing can be set to perform only Auto Exposure Bracketing or Flash
Exposure Bracketing where both are normally performed simultaneously (page 73).
2
Set the number of shots and compensated EV value
by rotating the Sub-Command Dial while pressing the
Auto Exposure/Flash Exposure Bracketing
W
button.
• See the table on the next page for the combinations of the number of shots and
compensated EV value.
·
2
:
Compensation value can be set to change in steps of 1/2 or one (page 71).
F100_En_16 7/8/05 8:06 PM Page 57
Summary of Contents for F 100
Page 1: ...En INSTRUCTION MANUAL En ...
Page 14: ...14 ...
