Nikon F 100 Instruction Manual Download

Page: 51 / 112

Exposure

Locking aperture

To lock aperture set at step 2, rotate
the Sub-Command Dial while pressing
the shutter speed/aperture lock button

—

so aperture lock indication

appears in the LCD panel and
viewfinder. To release the lock, rotate
the Sub-Command Dial while pressing
the shutter speed/aperture lock button

—

so aperture lock indication

disappears in the LCD panel and
viewfinder.

Compose picture, focus and shoot.

• When the subject is too dark or too bright, one of the following warnings

will appear in the LCD panel or viewfinder. (Electronic analog exposure
display will also indicate the amount of under- or overexposure.)
•

: Select smaller aperture (larger f-number). If the warning indication

persists, use an ND filter.

•

: Select larger aperture (smaller f-number). If the warning indication

persists, use the Speedlight.

Shutter speed/aperture value displayed in the LCD panel and

viewfinder can be set to change in steps of 1/2 or one (page 71).

F100_En_16 7/8/05 8:06 PM Page 51

Summary of Contents for F 100

















































































































Search results

Summary of Contents for F 100

Reviews:

Related manuals for F 100

Brands by name

Popular brands

Nikon F 100, Instruction Manual

Search results

Summary of Contents for F 100

Reviews:

Related manuals for F 100

Brands by name

Popular brands