Nikon F 100 Instruction Manual Download

Page: 41 / 112

While keeping the focus locked, recompose and
shoot.

• After you have locked focus, do not change the camera-to-subject

distance. Otherwise, refocus and lock the focus again.

• If you keep the shutter release button lightly pressed after releasing the

shutter in Single Servo AF, the shutter can be released repeatedly with the
same focusing. Similarly, if you keep the

‚

button pressed after releasing

the shutter, the shutter can be released repeatedly with the same focusing.

Focus

In Continuous Servo AF

Confirm focus indicator

then (while keeping shutter release button lightly

pressed) press the

‚

button.

• Focus is locked as long as the

‚

button is kept pressed, even if you

remove your finger from the shutter release button. In Auto Exposure
mode, exposure is also locked in this case (page 54).

Only focus can be set to lock when

‚

button is pressed (page

75).

F100_En_16 7/8/05 8:06 PM Page 41

Summary of Contents for F 100

















































































































Search results

Summary of Contents for F 100

Reviews:

Related manuals for F 100

Brands by name

Popular brands

Nikon F 100, Instruction Manual

Search results

Summary of Contents for F 100

Reviews:

Related manuals for F 100

Brands by name

Popular brands