III. Operation of each part
53
Photo-mask and the range to be taken on photo
(Photo-mask is not equipped on TE2000-S.)
Turning the photo-mask dial counter-clockwise will bring photo-mask in the optical path. The photo-mask can be used for
diopter adjustment or trimming on photomicrography.
Mask eyepiece and the range to be taken on photo
Remove one eyepiece and insert the “mask eyepiece” instead. This will enable trimming for photomicrography from the
binocular part of the microscope even with TE2000-S that does not have the eyepiece tube turret. It should be noted
however, that the range shown by the mask eyepiece is only a rough guide. If precise trimming is required, look and check
through the finder on the camera or the photomicrography equipment.
The following illustration shows the range taken on photo when the photomicrography equipment is attached on the side
port. (The range differs according to the magnification of the projection lens.)
For digital camera
on the front port
with T-BFA F-mount adapter (1X)
For 35mm single-lens reflex camera
on the front port
with T-BSLR SLR camera adapter 2.5X
For digital camera
on the front port
with T-BDCA direct C-mount adapter 2.5X
PL2X (35mm full size)
PL4X (35mm full size)
PL5X (35mm full size)
PL2.5X (35mm full size)
PL2.5X (35mm half size)
