JAA80551-R.3757.A
- 13・AF-S DX 18-105/3.5-5.6G ED VR -
Plate spring
・
Mount the plate spring (#137), tighten the screw (#116).
#137
#116
Brush unit
・
Insert the infinity pin (J11339), and mount the brush unit (B117).
・
When mounting [B117], cover the upper area of the pattern with a sheet, etc, (approx. 20×20mm), in order
to prevent bending of brush.
B117
J11339
Sheet, etc
Note: When inserting [J11339], set the segment gear ring unit to infinity-end, then insert [J11339] by
pushing in it while turning the segment gear ring unit toward CLOSE.
Adhesive:Screwlock
Segment gear unit
Grease:PL-22SEL
Apply to the pattern surface
Changed page
△× 1
September.25.2008
△(Deletion)
INC