18
●19.
Memory Function
When the current displayed value
i s t h e m a x i m u m o r m i n i m u m ,
the MAX or MIN lamp lights up,
respectively.
S w i t c h e s t h e n o r m a l d i s p l a y, t h e
maximum value display, and mini-
mum value display.
Press and hold this key for 5 seconds
or more to clear the memory.
• During measurement, the maximum display value (MAX value) and minimum display value (MIN value) per display
update cycle is always maintained.
• Pressing the MEM key allows you to check the maximum and minimum values maintained during the measurement.
• Press and hold the MEM key for 5 seconds during the normal measurement and memory display ● Clears the
maintained MAX and MIN values.
• As in the figure below, the maintained values are cleared when the measurement is reset
(when the mode and setting value are changed, and the power is turned ON).
MAX and MIN lamps
MEM key
MAX
MIN
MAX MIN
Normal measurement display
Normal measurement display
Normal measurement display
Maximum value display
Press the MEM key once during the normal measurement
to display the maximum value.
●●●●●●●●●●●●●●●● (MAX lamp lights up)
Press the MEM key once when the maximum value is
displayed to display the minimum value.
●●●●●●●●●●●●●●●●● (MIN lamp lights up)
Press and hold the MEM key for 5 seconds during the nor-
mal measurement or when the maximum/minimum value
is displayed, the MAX and MIN lamps blink for 2 seconds.
●●●●●●●●●●●●●●●●●(MIN lamp lights up)
After the MAX and MIN lamps blink for 2 seconds, the
memory is cleared and the display returns to the normal
measurement display.
Press the MEM key once when the minimum value is
displayed to return to the normal measurement display.
1 0
1 0
1 0
1 0 0
1 0
1
1
電 電 ON
MAX 電
MIN 電
電 電 電
MIN 電
MAX 電
電 電 電
電 電 電 電 電 電 電電 電 電 電 電 電 電
• Key to be used for the memory function and display
Power ON
MAX value
MAX value
MIN value
MIN value
Display value
Display value
Measurement reset
(clears the maintained values)
www.calcert.com
1.888.610.7664
0
5
10
15
20
25
30
