NC-AD300E Manual
- 24 -
After completion of editing, write to ROM and RAM . restart the device to take effect.
5.2.4 E1 Configuration
If you need to use E1 lines, then the configuration of E1 is necessary. E1 transmission is
synchronized signals, using the call signaling control.
5.2.4.1 Clock Source
E1 clock synchronization signal needs to be unity for working properly. AD300E itself does
not provide the clock source, but it can get the clock from other side through E1.you can click
“system parameters ” index ,and modify E1 clock source on the right parameter area.
Tips: Usually get the clock source through PCM0
After completion of editing, write to ROM and restart the device to take effect.