NC-AD300E Manual
- 53 -
setlcdr
setlcdr
setlcdr
setlcdr
Trace levels (0 ~ 7)
Track,then send the case
ErrorCode
ErrorCode
ErrorCode
ErrorCode
Mistake code
See the error code information
ErrorHelp
ErrorHelp
ErrorHelp
ErrorHelp
Show
trace levels of the detailed description
of
Note that all of the commands are case-sensitive.
7.3 calling trace
Using setlapp 7 command can track calling record .
7.4 E1 monitor
The small tools of NiceMonitor.exe
is to
monitor the E1 status of AD300E. Monitor use UDP
network connections. In the configuration tool interface, the parameters of the index area, select
"SysPart" in the right to see the UDP port.
7400 is commonly used.
Monitoring software interface is as follows:
NiceMonitor can monitor all of the equipment from Nice Communication which has E1 interfaces.
m
ultiple devices can be monitored, the port for each device must be set to different values.
Add your equipment, by click the shortcut of
, input the parameter of this device:
