NC-AD300E Manual
- 27 -
Device support MFC and DTMF two kinds of hair yards way. PCM multiplexing for
digital-analog conversion, the time slot channel line-one correspondence with the module,
which is equivalent analog line extension through E1. The default settings are usually able to
successfully connect, if client requests are special, according to manually specify the DL
value.
V5.2 signaling parameters are as follows:
CIC: identity V5 within the PCM-link a logical sequence of numbers, both sides must be
consistent.
Attr: to specify
the primary link
,
2nd link
or
no link.
Link time slot: designated which time slot is C-channel. When you select no link, unused
