࿈
elero GmbH
EN | 9
3.1.1 Control module (ExitSafe-S)
The drive, mains supply, battery pack and all the com-
mand initiators required are connected to the ExitSafe-S
control module. The control module also contains the
DIP switches used to set the ExitSafe system. The
control module evaluates these DIP switches and the
connected command initiators and controls the drive
accordingly. It supplies the drive with power from the
battery pack. The control module generates voltage via
the mains connection, which is used to recharge the
battery pack.
3.1.2 Battery pack (ExitSafe-A)
The battery pack ExitSafe-A stores the power required
to operate the ExitSafe. The battery pack contains
various protective devices that prevent damage to the
battery cells due to overvoltage or undervoltage, short
circuits or overloading.
3.2 Usable
drives
To be used only with wired elero DC drives (12 V direct
current).
• VariEco M10 DC (34 621.0101), with original 2.0 m
connection cable, do not extend
• VariEco M12 DC (34 611.0101), with original 2.0 m
connection cable, do not extend
• JA 04 Soft DC (35 113.0001), with original 0.5 m
connection cable, can be extended with a maximum of
one extension, art. no. 26 619.0401 (length of 2.20 m)
