26 | EN
࿈
elero GmbH
6.2
Replacing the battery pack
• Only replace the battery pack (elero 28 388.201) only
when it is disconnected from the mains voltage.
• The type designation of the new accumulator must
match the accumulator to be replaced.
• Disconnect and connect it with the necessary care for
all components.
• The end positions of the blind do not have to be
retaught.
• Tape o
ff
the open contact points of the used battery
pack and dispose of it in accordance with the statutory
regulations.
• To use the full functionality, charging for several hours
in the installed state is necessary.
6.3 Repairs
Damaged ExitSafe components may only be repaired by
the manufacturer. If necessary, contact your supplier.
7 Certi
fi
cation and imprint
7.1
EU Declaration of Conformity
elero GmbH hereby declares that ExitSafe complies with
Directive 2014/53/EU. The full text of the EU Declara-
tion of Conformity is available at the following Internet
address:
www.elero.de/downloads-service
7.2 Legal
Disclosure
elero GmbH
Maybachstr. 30
73278 Schlierbach
Telephone: +49 (0)7021 9539-0
Email: [email protected]
