8 | EN
࿈
elero GmbH
WARNING
Risk of injury, damage to the ExitSafe and
damage to the area surrounding the ExitSafe as
a result of improper electrical connections.
•
The electrical connection may only be conducted by
quali
fi
ed personnel.
•
Only perform work on the electrical connection if it
has been disconnected from the power supply.
•
Observe the charge status of the battery pack.
•
Note the technical data for the device.
•
Take care to ensure correct, securely a
ffi
xed
connections.
ATTENTION
Exchanging components of the ExitSafe with
third party components may damage the compo-
nents or other connected systems.
•
Exchange components between di
ff
erent systems
only after consultation with the manufacturer or your
supplier.
•
When replacing a component, check whether the
type description of the new component matches the
one being replaced.
3 System
description
3.1 System
design
ExitSafe consists of two main components:
• Control module (ExitSafe-S)
• Battery pack (ExitSafe-A)
Figure 1 is a diagram of the ExitSafe connection.
