࿈
elero GmbH
EN | 7
WARNING
ExitSafe ExitSafe may not be used in escape rou-
tes and primary rescue routes in accordance with
the Model Building Regulation (MBO).
•
Do not use in locations where failure or malfunction
could result in the obstruction of an escape route or
a primary rescue route.
When using ExitSafe, compliance with the national and
international safety and accident prevention regulations
speci
fi
c to the application is required.
ExitSafe components are designed for installation in
fl
ush/surface mount housings. Any conversions or other
modi
fi
cations to ExitSafe are not permitted.
Use the ExitSafe system only with suitable drives for
roller shutters and venetian blinds from elero. If drives
from other manufacturers are connected, there will be
no entitlement to warranty.
2.3
Installation and commissioning
WARNING
Risk of injury due to unexpected start-up of the
connected drive.
•
Disconnect the ExitSafe battery pack before perfor-
ming work on the drive.
•
Only perform work on the electrical connection if it
has been disconnected from the power supply.
