Nibart 1060 Series, User'S Installation, Operation And Maintenance Manual

Page: 34 / 44

Series 1060
34
Sync Handheld Re-
mote
to Control Module:
action result no beep?
step #1
Press and release
LEARN
button on the module
single beep from mod-
ule to step
#2
- ensure module is powered by Adapter or battery back-up
system
to step
#1
- confirm module switch is in REMOTE position
- clear module memory - hold LEARN button 10 sec - 3 long
beeps
step #2
Press MODE on
Remote
within 10 sec
4 rapid beeps - see above
Gas Type Selection
Press and hold
LEARN single beep 1 sec in
length LP
ready
Factory setting - NG button on the module
for 20 sec single beep 3 sec in
length NG
ready
Spark / Continuous
Pilot
Factory setting -
spark Press and release:
PROG/TIME
and FLAME MAIN
buttons
at the same time
Continuous pilot will
display on Remote LCD
screen To switch back to spark, repeat
Child Lock-out Press and release:
PROG/TIME
and UP buttons at
the same time
CP will display on
Remote LCD screen. To switch back, repeat lock out steps
TROUBLESHOOTING