NHProEquip TC-1300, User Manual

Page: 19 / 36

18
Danger of explosive
！
When inflate the tire, do not exceed 3.5bar
（
51psi
） ；
If need relative high air pressure,
detach the tire from the turntable and place
into the special tire cage to inflate, Never
exceed the inflation pressure suggested by the
manufacturer. Keep your hand and the body
behind the tire being inflated. Only can the
person under the professional training inflate
the tire. The other persons should not stand
near the tire changer and operate.
6.2Use the IT system to inflate the tire
When inflate the tubeless tire, it is convenient to use IT
system to inflate.
During this process, the noise can reach
85dB.At this time, we suggest to use the
noise protection.
①Fix the wheel on the turntable and connect the
inflation head with the core of the tire.
② Check whether the size of the tire is mating with
the size of the rim.
③Check whether the bead has been fully lubricated.
If necessary, undertake the lubrication.
④ Step down the pedal to the middle position.
⑤Inflation，Check the air pressure of the pressure
gauge. Continue inflation. Check air pressure while
inflation until the pressure reach the pressure
value required.
Danger of explosive
！
When inflate the tire, do not exceed 3.5bar
（
51psi
） ；
If need relative high air pressure,
detach the tire from the turntable and place
into the special tire cage to inflate, Never
exceed the inflation pressure suggested by the
manufacturer. Keep your hand and the body
behind the tire being inflated. Only can the
person under the professional training inflate
the tire. The other persons should not stand
near the tire changer and operate.
7. Helper installation and
operation
（helper is optional）
PL330 left helper and AL335 right helper is the
important assist device to the tire changer. You can
attach one or both to the tire changer with the
turntable larger than 20 ″ , helping demount and
mount the stiff and run flat tire difficult or
impossible to complete only be human force.
7.1 Left helper installation
Switch off the power supply and air source
before installation！