Installation and User Guide of Board
Ideas of Interaction
14
Table mounting procedures
Accessory list
Vertical mounting bracket
Bevel edge lever
Bottom bracket
Horizontal bar
5.
Set up the four Expansion Bolts
and make sure 775mm distance
remain between these two
L-shaped metal brackets,
1600mm height distance from
floor to the top-fixed Expansion
Bolt, marked the right positions
with pencil.
6.
Drill 50mm hole on the wall with
percussion drill 10mm, and
position the Expansion Bolt into
the hole, strengthen and fasten
them.
7. The illustration on the right shows
the common heights of 160mm
for adjusting when you finished
above steps and attach the back
of TGN50 Interactive Whiteboard
upon the L-shaped metal brackets
2
4
2
4
1
14
22
18
14