Nexxt Solutions - NexxtGate Wireless Access Point
74
5. The wireless stations cannot connect to the router.
Login to the router, click the “Forwarding” menu on the left of your browser, and click the “Virtual
Servers” submenu. On the “Virtual Server” page, click Add New, then on the “Add or Modify a
Virtual Server” page, enter “80” into the blank field next to “Service Port”, and your IP address
next to the corresponding blank field, taking 192.068.0.188 as an example. Remember to
Enable and Save your settings at the end.
Make sure the “Wireless Router Radio” is enabled.
Make sure that the wireless stations’ SSID matches the router’s SSID.
Make sure the wireless stations have chosen the right KEY for encryption when the router
is encrypted.
If the wireless connection is ready, but you can’t access the router, check the IP Address
of your wireless stations.
Note:
If the above configuration takes effect, type http://192.168.0.1:88/ to access the router in the
address field of the Web browser (the router’s LAN IP address: Web Management Port).
3.
1.
2.
3.
4.
Figure A-7 Remote Management
Figure A-8 Virtual Servers
A-9 Add or Modify a Virtual server Entry
