Nexxt Solutions - NexxtGate Wireless Access Point
43
To modify or delete an existing entry, please complete the steps below:
Note:
Click the
Enable
All button to activate all entries.
Click the
Disabled
All button to cancel all entries.
Click the
Delete
All button to erase all entries.
Click the
Modify
button next to the entry you want to change. If you want to delete that entry,
click the
Delete
in this stage.
Proceed with the changes you want to make.
Click the
Save
button when you are done.
When the trigger connection is released, will cause the closing of the corresponding opened
ports.
Each rule can only be used by one host on the LAN at a time. The trigger connection of other
hosts on the LAN will be refused.
Incoming Port Range enabled cannot overlap each other at the same time.
1.
2.
3.
1.
2.
3.
4.9.3 DMZ (Demilitarized Zone)
Go to
Forwarding
>
DMZ
in order to set up an DMZ host on this page, as shown in
Figure 4-32.
Figure 4-31 Add or Modify a Triggering Entry
Figure 4-32 DMZ
