Nexxt Solutions - NexxtGate Wireless Access Point
37
4.7.2 DHCP clients list
Go to
DHCP
>
DHCP Clients List
in order to visualize the Client Name, MAC Address,
Assigned IP and Lease Time for each DHCP Client attached to the device (Figure 4-23).
No values on this page can be modified. To update this page and to show the devices currently
attached, click on the Refresh button.
•
•
•
•
•
•
•
•
•
•
•
•
•
DHCP Server
- Selecting the radio button next to Disable/Enable will switch the DHCP
server off or on in your AP. The default setting is Disable. If you disable the Server, you must
have another DHCP server within your network. Otherwise, you will have to configure the
IP address of the computer manually.
Start IP Address
- This field specifies the first address in the IP Address pool.
192.168.0.100 is the default start IP address.
End IP Address
- This field specifies the last address in the IP Address pool. 192.168.0.199
is the default end IP address.
Address Lease Time
- Enter the amount of time for the PC to connect to the AP with its
current assigned dynamic IP address. The time is measured in minutes. After the time is up,
the PC will be automatically assigned a new dynamic IP address. The time range is 1 ~ 2880
minutes. The default value is 120 minutes.
Default Gateway (optional)
- This field is used to enter the IP address of the gateway for your
LAN. The factory default setting is 0.0.0.0.
Default Domain (optional)
- This field is used to enter the domain name of the your DHCP
server. You can leave the field blank.
Primary DNS (optional)
- This field is used to enter the DNS IP address provided by your ISP.
Consult your ISP if you don’t know the DNS value. The factory default setting is 0.0.0.0.
Secondary DNS (optional)
- This field is used to enter the IP address of another DNS server
if your ISP provides two DNS servers. The factory default setting is 0.0.0.0.
ID
- In this field, the index of the DHCP client is displayed.
Client Name
- Here displays the name of the DHCP client.
MAC Address
- In this field ,the MAC address of the DHCP client is displayed.
Assigned IP
- In this field, the IP address that the AP has allocated to the DHCP client
is displayed.
Lease Time
- In this field,, the time of the DHCP client leased is displayed. Before the time
is up, DHCP client will request to renew the lease automatically.
Click
Save
to save the changes.
Note:
To use the DHCP server function of the device, you should configure all computers in the LAN
as “Obtain an IP Address automatically” mode. This function will not take effect only after the
device reboots.
!
Figure 4-23 DHCP Clients List
